Markbass COMBO 121 LITE User Manual download pdf (Page 4)

COMBO 121 LITE HEAD -

TECHNICAL DETAILS

INPUTS

INPUT Impedance 1 Mohm; maximum voltage 10 Vpp

RETURN Impedance 33 Kohm; max 10 Vpp

AUX Impedance 10 Kohm; max 4 Vpp

CONTROLS

GAIN Range –60 to +23 dB

LINE OUT GND Lift, Pre/Post EQ, Pre/Post Master

(Pre EQ is not possible in combination with Post Master)

EQUALIZATION

LOW center frequency 40 Hz; level: ±16 dB

MID/LOW center frequency 360 Hz; level: ±16 dB

MID/HIGH center frequency 800 Hz; level: ±16 dB

HIGH center frequency 10 kHz; level: ±16 dB

VLE max cut range: 250 Hz – 20 kHz

VPF center frequency 380 Hz (cut)

MUTE ON/OFF by footswitch or front panel switch

FX Loop BYPASS ON/OFF by footswitch

OUTPUTS

LINE OUT Balanced, max voltage 20 Vpp

SEND unbalanced, max voltage 20 Vpp (pre-EQ)

TUNER OUT unbalanced, max voltage 2 Vpp

PREAMP OUT unbalanced, maximum level 20 Vpp

PHONES 600 ohm, maximum level 10 Vpp

OTHER

ACTIVE CROSSOVER FREQUENCY 3,5 kHz

AMPLIFIER POWER 500W digital (woofer) + 100W analog (tweeter)

WOOFER SIZE 12”

TWEETER VOICE COIL 1.25”

BASS PORT Rear

FREQUENCY RESPONSE 45 Hz to 18 kHz

POWER REQUIREMENT 240V or 230V or 120V or 100V

(Version factory preset inside the equipment)

Markbass apparatuses are manufactured to be sold and used in the

country of purchase, and are factory preset to that country’s voltage.

Due to homologation issues, the voltage may not be changed.

FUSE

EUROPE 6.3A 250V T 5x20

AUSTRALIA/UK 6.3A 250V T 5x20

USA/CANADA 8A 250V T 5x20

JAPAN 10A 250V T 5x20

COMBO 121LITE HEAD - BLOCK DIAGRAM

Input

GAIN

-20 dB

Send

Master

Line out

AUX

MUTE

EQUALIZER

Pre/Post EQ

Pre/Post

Master

Return

FX LOOP BYPASS

Tuner

Pre-amp out

LOW HIGH

BIAMP

Phones

1 2 3 4 5 6 7 8

FX LOOP BYPASS 4

Comments to this Manuals

No comments

Markbass COMBO 121 LITE User Manual Page 4

Comments to this Manuals

Related products and manuals for Audio Markbass COMBO 121 LITE